QCIT-GR Base Metal:
The beam, transition, end, and buffer sections shall consist of sheet made of open hearth, electric furnace or basic oxygen steel and shall meet the mechanical properties specified in table as below.
| Mechanical properties: The mechanical properties of the base metal shall conform to the following requirements: |
|
Beams and transition sections: Yield Point, minimum, 345 MPa (50000 psi); Tensile Strength, minimum 483 MPa (70000 psi); and Elongation, in 50 mm (2 in.), minimum, 12 percent. |
|
End and buffer sections: Yield Point, minimum, 227 MPa (33000 psi); and Tensile Strength, minimum 310 MPa (45000 psi). |
QCIT-GR Ordering information:
Orders for guardrail under this specification shall include the following information, as required, to adequately described material:
· Quantity (linear meter or number of pieces).
· Class of guardrail.
· Types of guardrail.
· Effective length of beam section 3.8 mm or 7.6 mm.
· Shape (W-beam or Thrie-beam).
· Exceptions to this specification or special requirements, if any.
QCIT METAL PRODUCTS - GUARDRAILS
Our complete highway guardrail systems including w beam guardrail, Thrie beam guardrail, highway guardrail post, spacer, end terminal, reflector, bolts, etc.
WhatsApp: +8618926086559
Phone: 0086-18926086559
Tel: 0086-755-23091971
Email: info@qcitgroup.com
Add: HONG KONG, HUBEI & TSINGTAO, CHINA.
Skype: Qiaochuit